DISPENSING BOTTLES
ADJUSTABLE MEASURING CUP DISPENSING BOTTLES
These low density polyethylene bottles come with a PMP measuring cup that slides vertically on the HDPE suction tube to adjust the fill volume. Set the cup at the level of liquid you desire and squeeze the bottle. Any excess over your fill desire will automatically get sucked back into the bottle. Only the required amount remains in the measuring cup and then go ahead and pour your measured liquid out.
| SCI Cat. # | Bottle Capacity (ml) | Measuring Cup Size (ml) | Case Quantity | Case Price |
|---|---|---|---|---|
| 206305 | 250 ml | 5-25 ml | 10 Bottles | $201.08 $201.08 |
| 206315 | 500 ml | 5-25 ml | 10 Bottles | $220.60 $220.60 |
| 206325 | 1000 ml | 5-25 ml | 10 Bottles | $283.37 $283.37 |
| 206335 | 250 ml | 5-50 ml | 10 Bottles | $256.22 $256.22 |
| 206345 | 500 ml | 5-50 ml | 10 Bottles | $271.05 $271.05 |
| 206355 | 1000 ml | 5-50 ml | 10 Bottles | $340.01 $340.01 |
AUTOMATIC TITRATING BURETTE
This automatic titrating burette is a universal aid in the laboratory and is ideal for use in laboratories, the electroplating industry, in water treatment plants and for field analysis, just to name a few. The burette is made of Schott graduated borosilicate glass with blue ring graduations and Schellbach stripe. Each unit comes with A33 ounce (1 liter) LDPE chemical resistant bottle.
| SCI Cat. # | Capacity (ml) | Division (ml) | Precision (ml) | Height (cm) | Price |
|---|---|---|---|---|---|
| 896954-1005 | 5 ml | 0.05 ml | ± .015 | 48 cm | $172.33 $172.33 |
| 896954-1010 | 10 ml | 0.05 ml | ± .030 | 57 cm | $172.33 $172.33 |
| 896954-1015 | 15 ml | 0.10 ml | ± .045 | 49 cm | $172.33 $172.33 |
| 896954-1025 | 25 ml | 0.10 ml | ± .045 | 61 cm | $172.33 $172.73 |
| 896954-1050 | 50 ml | 0.10 ml | ± .045 | 87 cm | $201.78 $201.78 |
LOW DENSITY POLYETHYLENE BOSTON ROUND DISPENSING BOTTLES
These low density polyethylene bottles are very easy to squeeze and are supplied with a re-closable dispensing yorker cap.
| SCI Cat. # | Capacity (ml) | Cap Size (mm) | Case Quantity | Case Price |
|---|---|---|---|---|
| 605085-0005 | 15 ml | 15 mm | 48 Bottles | $70.26 $70.26 |
| 605085-0010 | 30 ml | 18 mm | 48 Bottles | $73.91 $73.91 |
| 605085-0020 | 60 ml | 18 mm | 48 Bottles | $86.66 $86.66 |
| 605085-0040 | 125 ml | 24 mm | 36 Bottles | $86.66 $86.66 |
| 605085-0060 | 180 ml | 24 mm | 36 Bottles | $110.79 $110.79 |
| 605085-0080 | 250 ml | 24 mm | 36 Bottles | $127.81 $127.81 |
| 605085-0160 | 500 ml | 28 mm | 24 Bottles | $108.64 $108.64 |
LOW DENSITY POLYETHYLENE CYLINDER BOTTLES w/ ATTACHED CAP
A low density polyethylene bottle and attached cap. Maximum temperature for this bottle is 80°C.
| SCI Cat. # | Capacity (ml) | Case Quantity | Case Price |
|---|---|---|---|
| 524185-0030 | 30 ml | 10 Bottles | $20.06 $20.06 |
| 524185-0060 | 60 ml | 10 Bottles | $18.96 $18.96 |
| 524185-0125 | 125 ml | 10 Bottles | $22.17 $22.17 |
| 524185-0250 | 250 ml | 10 Bottles | $38.17 $38.17 |
| 524185-0500 | 500 ml | 10 Bottles | $48.36 $48.36 |
LDPE DISPENSING BOTTLES WITH SPRAY NOZZLE
These low cost wash bottles have a fine bore dispenser tubing that comes through the cap. You can cut back on the tip to increase the flow from a drop to a fine flow. The bottle and cap are good to temperatures of 80°C.
| SCI Cat. # | Capacity (ml) | Cap Size (mm) | Pack Quantity | Pack Price |
|---|---|---|---|---|
| 106155-04 | 125 ml | 24 mm | 48 Bottles | $158.90 $158.90 |
| 106155-08 | 250 ml | 24 mm | 36 Bottles | $144.90 $144.90 |
| 106155-16 | 500 ml | 28 mm | 24 Bottles | $117.00 $117.00 |
| 106155-32 | 1000 ml | 28 mm | 12 Bottles | $77.10 $77.10 |
LOW DENSITY POLYETHYLENE SHORT & LONG NECKED GRADUATED BOTTLES
An ideal bottle for water and oils as there are no shoulders to restrict flow. They are graduated and can be used as rough measures. Molded in area for tag to allow for easy identification. They conform to DLN13316 and 168.
Available in both short neck and long necked spout.
| SCI Cat. # | Spout Style | Size (ml) | Graduations (mm) | Diameter (mm) | Height (mm) | Pack Quantity | Pack Each |
|---|---|---|---|---|---|---|---|
| 224125-0050 | Long Neck | 50 ml | 10mm | 38mm | 129 mm | 10 Bottles | $54.10 $54.10 |
| 224125-0100 | Long Neck | 100 ml | 20mm | 48mm | 147 mm | 10 Bottles | $63.06 $63.06 |
| 224135-0050 | Short Neck | 50 ml | 10mm | 38mm | 106 mm | 10 Bottles | $54.10 $54.10 |
| 224135-0100 | Short Neck | 100 ml | 20mm | 48mm | 127 mm | 10 Bottles | $63.06 $63.06 |
LOW DENSITY POLYETHYLENE DROPPING BOTTLES
These low density polyethylene dropping bottles are supplied with a dropper cap that is designed for dispensing fluids you want to control by the drop like dyes.
| SCI Cat. # | Capacity (ml) | Cap Size (mm) | Bottle Height w/ Cap (mm) | Case Quantity | Case Price |
|---|---|---|---|---|---|
| 605065-0010 | 30 ml | 18 mm | 81 mm | 48 | $98.00 $98.00 |
| 605065-0020 | 60 ml | 18 mm | 91 mm | 36 | $88.00 $88.00 |
| 605065-0040 | 125 ml | 24 mm | 115 mm | 36 | $95.00 $95.00 |
| 605065-0060 | 180 ml | 24 mm | 132 mm | 36 | $110.00 $110.00 |
| 605065-0080 | 250 ml | 24 mm | 144 mm | 24 | $90.00 $90.00 |
| 605065-0160 | 500 ml | 28 mm | 167 mm | 24 | $120.00 $120.00 |
