PTFE FILM (Cat.# BB9552-2-.002″x24″x12″)
$4.00
SCI Cat.# BB9552-2
Dimensions: 24″ Wide x 12″ Long
Thickness: 2 MIL (.002″) (.05 mm)
Priced Per Sheet
- Description
- Additional information
Description
PTFE FILM
These films are manufactured in the United States from non-stick, virgin PTFE and are used as a top for workbenches, industrial gaskets, wear surfaces, drainboards, sinks, and shelf liners. They are non-porous and non-absorbent and therefore will not retain odors. PTFE has a temperature range of -320°F to +500°F. If a cert is required to meet this AMS specification, material has to be purchased and sent to an independent lab for testing and x-rays, at an additional cost. These sheets also meet USDA 21CFR 177.1550and UL94. To bond non-etched PTFE, you must spray and wipe off the surface to be bonded with SCI Cat.# PP-50 Poly-primer surface conditioner. Use SCI Cat.# RBRC-32 Rubber Cement for semi-permanent and SCI Cat.# GSI-100 for permanent bonds. No surface conditioner is required if you use our One-sided Etched PTFE film. Contact us for custom sizes and larger quantities.
SCI Cat.# BB9552-2
Dimensions: 24″ Wide x 12″ Long
Thickness: 2 MIL (.002″) (.05 mm)
Priced Per Sheet
Additional information
| Weight | 0.50 lbs |
|---|
