MEDICAL GRADE CYANOACRYLATE ADHESIVES & POLY-PRIMER
These clear medical grade USP Class VI cyanoacrylate adhesives are designed for bonding all types of connectors to plastics and TFE tubing, film and sheets.  They will withstand temperatures of -65°F to 200°F.  When using on lubricated plastics use the Poly-Primer Surface Conditioner (PP-50).

2-PART EPOXIES, MIXER TIPS & DISPENSING GUNS
We offer three varieties of epoxy to meet your requirements.  The GEP-105 is a flexible fast-curing clear or black 2-part epoxy and the GEP-110 is a general purpose hard setting, fast-curing epoxy also available in black and clear.  They will both be 90% cured in 45 minutes full cure in 24 hours.  The GEP-125 is a clear or black slow-cure 2-part epoxy.  This slow-curing epoxy will be 90% cured in 3 hours and fully cured in 24 hours.  They are all 1 to 1 ratio products.  Pint kits contain 1 pint each of A and B.

NOTE: The product table below scrolls so make sure to scroll down for more options

NON-MEDICAL GRADE CYANOACRYLATE ADHESIVES

These Global Adhesives non-medical grade cyanoacrylate adhesives are designed for bonding all types of plastics, rubber and metals.  They will withstand temperatures of -65°F to 200°F.  The black grade have a temperature resistance up to 250°F.  When using on lubricated plastics such as PTFE, Silicone and non-polar plastics, use the Poly-Primer Surface Conditioner (PP-50).

NOTE: The product table below scrolls so make sure to scroll down for more options.

ANAEROBIC & NITRILE RUBBER GASKET COMPOUNDS
The amber and black nitrile rubber cement will bond plastic, paper, cardboard, and steel.  They are very impact-resistant and will handle temperatures up to 250°F

ANAEROBIC THREADLOCKER

These Global Adhesives threadlockers are available in five grades for applications that vary from easily removable to permanent locking.  They meet military specification MIL-S-46163 and ASTM standard D5363.